Product Description

Elanzaa Luxury Emulsion (Exterior & Interior) 

Elanzaa is a 100% acrylic water-based luxury exterior & interior emulsion. Designed with silicon additives, Elanzaa provides excellent water repellence hence protecting the surface against heavy rain. Its unique polymer composition also provides superior dust resistance to the exterior surface. Elanzaa also helps to kill the growth of algae and fungus. Elanzaa is a high sheen, washable wall paint with stain-resistant properties.

Thinning

Upto 50% to 60% by volume using water.

Coverage*

100-110 sq. ft./Itr/coat, when applied on smooth and non-absorbent surfaces. 

*Actual coverage may vary depending on method & condition of application, surface roughness & shade.

Shades Available 

1700+ 

Available Pack Size 

200 ml, 1 Ltr, 4 Ltr, 10 Ltr, 20 Ltr

Recommended Usage

Elanzaa Luxury Emulsion is recommended for wall surfaces of all kinds of architectural buildings.

Post Application Instructions

For the best performance of the paint, ensure proper washing and cleaning of all algal and fungal growth, if any, at regular intervals of six months.

Recommended Primer

Eternity-Damp Protect

(Use of Eternity-Damp Protect (as primer) is mandatory to attain the specified life of the Elanzaa Luxury Emulsion.)

Directions For Use:

Surface Preparation: 

Remove all loose or poorly adhering materials by rubbing down using Sand Paper No.60/80/120 in phases and thereafter wipe clean. Ensure the surface is clean, dry, and free from all defective or poorly adhering material, dirt, grease, wax etc. Additional care of cleaning the walls needs to be taken in case of repainting.

Recommended Undercoats: 

Primer: For Plastered surfaces – Tulsi Paints Eternity Damp Protect 

Putty: For Plastered surfaces – Tulsi Paints Cement Based Putty / Polymer Putty. 

(Warranty valid only if recommended undercoats are used.)

Application:

Apply a coat of Tulsi Paints Eternity Damp Protect and allow the primer to dry for 6 - 8 hours. Apply two to three coats of the Tulsi Paints Elanzaa Emulsion using brush, roller, or spray with dilution ratio of 1:0.5 with water. Keep an interval of 5-6 Hours between each coat. However, time interval depends on climatic conditions and dilution should always be done considering the brush ability and roller ability of the material. 

(Warranty valid only if applied as per given direction for use.)

Best before 18 months from the date of manufacture

OTHER INFORMATION:

Manufactured and Marketed By:
Tulsi Paints Pvt. Ltd. 
28, Govardhan Ghat Road, 
Nanded-431602, Maharashtra