Product Description

GoodVibes Premium Interior Emulsion

GoodVibes Premium Interior Emulsion gives smooth and premium looking sheen to walls. GoodVibes Premium Interior Emulsion is specially formulated to protect the walls against most household stains and ensures easy cleaning ability. It forms a long-lasting film that keeps your house as good as new for a long time. GoodVibes Premium Interior Emulsion offers a unique range of colours.

Thinning

Upto 50% to 60% by volume using water.

Coverage*

100-110 sq. ft./Itr/coat, when applied on smooth and non-absorbent surfaces.

*Actual coverage may vary depending on method & condition of application, surface roughness & shade.

Shades Available 

1400+

Base 01, 20 

Available Pack Size 

200 ml, 1 Ltr, 4 Ltr, 10 Ltr, 20 Ltr

Recommended Usage

GoodVibes Premium Interior Emulsion is recommended for interior wall surfaces such as ceilings, putty surfaces, plastered surfaces, asbestos sheets, concrete, brickwork, etc.

Post Application Instructions

For best performance ensure dry surface dust cleaning at regular intervals. Allow drying time of 3 weeks for proper film formation. Sponge cleaning with mild soap solution can be done after 3 weeks only if necessary.

Recommended Primer

Praise Premium Base Coat

(Use of Praise Premium Base Coat is mandatory to attain the specified life of the GoodVibes Premium Interior Emulsion.)

Directions For Use:

Surface Preparation: 

Remove all loose or poorly adhering materials by rubbing down using Sand Paper No.60/80/120 in phases and thereafter wipe clean. Ensure the surface is clean, dry, and free from all defective or poorly adhering material, dirt, grease, wax etc. Additional care of cleaning the walls needs to be taken in case of repainting. 

Recommended Undercoats: 

Primer: For Plastered surfaces – Tulsi Paints Praise Premium Base Coat. 

Putty: For Plastered surfaces – Tulsi Paints Cement Based Putty / Polymer Putty. 

(Warranty valid only if recommended undercoats are used.) 

Application:

Apply a coat of Tulsi Paints Praise Premium Base Coat and allow the primer to dry for 6 - 8 hours. Smoothen the surface by filling dents and cracks with two coats of Tulsi Paints Cement Based Putty / Polymer Putty and allow each coat to dry for 4 - 6 hours. Sand the surface with Emery Paper 180 and wipe it clean. Apply a coat of Tulsi Paints Praise Premium Base Coat and allow the primer to dry again for 6 - 8 hours. Apply two to three coats of the Tulsi Paints GoodVibes Emulsion using brush, roller, or spray with dilution ratio of 1:0.5 with water. Keep an interval of 5-6 Hours between each coat. However, time interval depends on climatic conditions and dilution should always be done considering the brush ability and roller ability of the material. 

(Warranty valid only if applied as per given direction for use.)

OTHER INFORMATION:

Manufactured and Marketed By:
Tulsi Paints Pvt. Ltd. 
28, Govardhan Ghat Road, 
Nanded-431602, Maharashtra