Product Description

Grace Interior Emulsion 

Grace Interior Emulsion is a smooth matt finish paint formulated by a combination of pigments and extenders. It gives better finish, better coverage and is long lasting as compared to that of previously used distempers. It is an ideal economic emulsion as it offers finish of a plastic paint at a much lower price. Grace Interior Emulsion provides a wide range of shades to select from.

Thinning

Up to 40% to 50% by volume using water.

Coverage*

80-90 sq. ft./Itr/coat, when applied on smooth and non-absorbent surfaces.

*Actual coverage may vary depending on method & condition of application, surface roughness & shade.

Shades Available 

1200+ 

Available Pack Size 

200 ml, 1 Ltr, 4 Ltr, 10 Ltr, 20 Ltr

Recommended Usage

Grace Interior Emulsion is recommended for interior wall surfaces such as ceilings, putty surfaces, plastered surfaces, asbestos sheets, concrete, brickwork, etc.

Post Application Instructions

Surfaces painted by Grace Interior Emulsion are washable by sponging with mild soap and water after minimum of 3 weeks drying to remove ordinary stains and everyday dirt.

Recommended Primer

Polar Cement Primer

Directions For Use:

Surface Preparation: 

Remove all loose or poorly adhering materials by rubbing down using Sand Paper No.60/80/120 in phases and thereafter wipe clean. Ensure the surface is clean, dry, and free from all defective or poorly adhering material, dirt, grease, wax etc. Additional care of cleaning the walls needs to be taken in case of repainting. 

Recommended Undercoats: 

Primer: For Plastered surfaces – Tulsi Paints Polar Cement Primer. 

Putty: For Plastered surfaces – Tulsi Paints Cement Based Putty / Polymer Putty. 

(Warranty valid only if recommended undercoats are used.) 

Application:

Apply a coat of Tulsi Paints Polar Cement Primer and allow the primer to dry for 6 - 8 hours. Smoothen the surface by filling dents and cracks with two coats of Tulsi Paints Cement Based Putty and allow each coat to dry for 4 - 6 hours. Sand the surface with Emery Paper 180 and wipe it clean. Apply a coat of Tulsi Paints Polar Cement Primer and allow the primer to dry again for 6 - 8 hours. Apply two to three coats of the Tulsi Paints Grace Emulsion using brush, roller, or spray with dilution ratio of 1:0.5 with water. Keep an interval of 5-6 Hours between each coat However time interval depends on climatic conditions and dilution should always be done considering the brush ability and roller ability of the material. (Warranty valid only if applied as per given direction for use.)

OTHER INFORMATION:

Manufactured and Marketed By:
Tulsi Paints Pvt. Ltd. 
28, Govardhan Ghat Road, 
Nanded-431602, Maharashtra